"Ashwagandha 500 mg" can describe very different products. It might be 500 mg of dried, ground root. It might be 500 mg of an extract made from several kilograms of root. It might be an extract adjusted to contain a stated percentage of marker compounds. On a label they look the same; in the capsule they are not.
This guide explains the main categories of botanical ingredient, what each one tells you and does not tell you, and what to write into your specification so that every batch is the product you intended.
The basic categories
Raw herb powder
The plant part (root, leaf, seed, fruit, bark) is dried and ground. Nothing is concentrated or removed. In European regulatory language this is a "comminuted or powdered herbal substance".
What it gives you: the whole plant part as it occurs, which is often how a traditional formula specifies it, for example in classical churna-type preparations. Identity can be checked directly by macroscopic and microscopic examination.
What to watch: natural variation. The level of characteristic constituents in a plant can vary with genotype, growing region, harvest time, drying and storage. A raw powder also brings whatever the plant picked up in the field and in handling, so microbial load, heavy metals, pesticide residues and, for some materials, aflatoxins need limits. WHO's good agricultural and collection practices describe how cultivation and collection affect quality.
Extracts
An extract is made by treating the plant material with a solvent (commonly water, ethanol or a mixture) and then concentrating and usually drying the result. The European Pharmacopoeia, which European regulators follow, divides extracts into three types. The European Medicines Agency's guideline on the declaration of herbal substances and preparations summarises them:
- Standardised extracts are adjusted within an acceptable tolerance to a given content of constituents with known therapeutic activity. Standardisation is achieved by adding excipients or by blending batches.
- Quantified extracts are adjusted to a defined range of constituents (called active markers), by blending batches of extract or plant material.
- Other extracts are defined essentially by their production process and their specifications, without a declared marker content.
These are medicinal-product definitions. Food supplement and dietary supplement rules generally do not impose them, and in commercial trade the word "standardised" is often used loosely to mean "contains at least X% of some compound". When you see "standardised" on a supplier's sheet, ask which of these it actually means.
Drug-extract ratio (DER): useful, but not a potency claim
The drug-extract ratio describes how much starting plant material went into a given amount of extract. A "native" or "genuine" DER of 5–8:1 means 5 to 8 parts of dried herb yielded 1 part of extract, before any excipients are added. EMA's guidance asks for the genuine DER and the extraction solvent to be declared for quantified and other extracts.
Two cautions for buyers:
- DER does not tell you what is in the extract. A 10:1 extract made with water and a 10:1 extract made with ethanol can have very different compositions. Without the solvent and a marker or fingerprint, the ratio alone says little.
- "Equivalent to" claims need care. Labels such as "500 mg extract, equivalent to 5,000 mg herb" are arithmetic from the DER. Whether that equivalence is meaningful depends on the product, and whether it is permitted depends on your market's labelling rules. Check with your adviser before using it.
Markers: specify the compound and the method
A marker is a chemically defined constituent (or group) used to characterise an extract. Specifying markers is one of the best tools you have for batch-to-batch consistency, but only if the specification is complete.
A useful marker specification states:
- Which compound or group, named precisely.
- The acceptable range or minimum, on a defined basis (for example "on dried basis").
- The analytical method. Different methods can give different numbers for the same material; a value measured by a non-specific method such as UV spectrophotometry is not directly comparable to one measured by HPLC. If the method is not in the specification, two suppliers can both "meet 5%" and supply different materials.
- The reference standard used for quantification.
Pharmacopoeial monographs are the best starting point where they exist. The European Pharmacopoeia (EDQM), USP's dietary supplement and herbal medicine standards, and national pharmacopoeias such as the Ayurvedic Pharmacopoeia of India publish monographs for many botanicals, with identity tests and, often, assay methods.
Identity: the problem markers cannot solve on their own
A marker assay tells you how much of a compound is present; it does not always prove the material is the right plant. Some markers occur in several species, and adulteration of botanical ingredients with related or cheaper material is a documented problem. The American Botanical Council's Botanical Adulterants Prevention Program publishes bulletins on specific cases.
That is why identity is specified separately. US dietary supplement rules require at least one appropriate identity test or examination on every dietary ingredient before use (21 CFR 111.75). For botanicals, typical approaches include macroscopy and microscopy for powders, and chromatographic fingerprinting (such as HPTLC) for powders and extracts. WHO's quality control methods for herbal materials describes many of these techniques.
Which should you choose?
Neither is better in general. The choice depends on what the product is meant to be.
| Consideration | Raw herb powder | Standardised or quantified extract |
|---|---|---|
| Fits a traditional, whole-plant formula | Yes, often how it is defined | May change the character of the formula |
| Amount needed per serving | Higher | Lower |
| Batch-to-batch consistency of markers | Depends on raw material control | Controlled by specification |
| Taste and bulk in the dosage form | More noticeable | Usually easier to manage |
| Extra items to specify | Microbiology, contaminants, identity | Solvent, DER, carrier/excipients, marker method, residual solvents |
| Typical cost per kg | Lower | Higher, but less material per serving |
If your positioning rests on published research, check exactly what material the research used. If a study used a specific extract type, a raw powder of the same plant is not equivalent, and the reverse is also true.
A specification template for a botanical ingredient
Whatever you choose, these items belong in the specification:
- Botanical identity: Latin binomial with authority, plant part, and common name.
- Type: powder, or extract type (standardised, quantified, other).
- For extracts: extraction solvent(s), genuine DER, any carriers or excipients and their percentage.
- Identity test: method and acceptance criterion (for example HPTLC fingerprint matching a reference).
- Assay or markers: compound, range, basis, method and reference standard.
- Physical tests: appearance, loss on drying or moisture, particle size where relevant.
- Contaminants: heavy metals, microbial limits, pesticide residues, aflatoxins where relevant, residual solvents for extracts. Set limits for your destination market; WHO's guidance on contaminants and residues is a general reference, and the ICH quality guidelines (Q3C) cover residual solvents in pharmaceuticals.
- Storage and retest period.
For regulated herbal medicines in Europe, EMA's guideline on specifications for herbal substances and preparations shows how a full specification is built. Even if your product is a food supplement, it is a useful model.
How we approach this at Amulya Labs
Our R&D team designs formulations on a scientific basis, and we will work with you on whether a powder, an extract or a combination best serves your product and its claims. Every order is supplied with COAs, and Amulya Research Centre can run in vitro, animal, human or dermatological studies when a formulation needs its own evidence. We manufacture in a WHO-GMP certified facility, with more than 40 years of manufacturing heritage.
This guide is general information for B2B buyers, not regulatory advice. Ingredient rules, permitted claims and contaminant limits vary by market.